Getting Down To Basics with

Steps to Make Doll Shoes Without Sewing a Stitch

You may have the wish of making the doll shoes but afraid of doing so because you have no skills in sewing. However, with this, you do not have to worry more about that. There is a way that you can still make the doll shoes without a single stitch. For the necessary information on sewing, the butterfly is the best style that you need to know. To prove that you can do it, the article below is a perfect guide that will help you know the best way to do the shoemaking without even a single stitch requirement.

To begin making the shoe, there are some things that you need to have since they will help you in making the shoes. To make sure that you have the right requirements, there is a list of items that you need to have to make sure that you are ready to go With all the tools, you are one step ahead in making the doll shoes that you wish to have. The steps that you need to know requires one to be patient and committed to making sure that you get the best result.

To start with, cutting the elements is the first thing that you have to do to make sure that you have the required pattern. The cardboard is the materials that you are required to cut to get the model that you need. The second thing that you have to do is to design the shoelace holes in the vinyl material. This should be done on the upper part of the plastic using the leather puncher. After punching the holes, then you are required to use the hobby knife to remove the cuts out, to make sure that you have an even pattern of the holes.

The third thing to do is to apply the glue on the vinyl material and the carton to finally make the sole. In this step, your main aim is to make sure that the sole reinforcement, which is the cardboard and the vinyl, which is the sole, are firmly stuck together. In this step, you should be careful so that you can make sure that the vinyl material and the cardboard are stuck together firmly. After gluing the two separate parts, now it comes to the step of attaching the two pieces.

In making sure that you have a firm sole, the rear part of the shoe should be the final one to attach. The foam and the hot glue are applied from the sole to the upper part to finish up the process. After this, you can press the sole hard for some few minutes to make sure that the two parts are stuck firmly together. Finally, you should trim the extra parts to have a uniform edge. In conclusion, with these steps, you can make the best shoe that you wanted.

What Research About Can Teach You

Where To Start with and More